Heating part

Contact us

National consultation hotline0086 17748655349

Shenzhen Feng Da Precision Tech Co.,Ltd

Shenzhen Feng Da Precision Tech Co.,Ltd

1st Floor, No. 15, Guangming Tongfuyu Industrial Park, Zhenmei

Community, Xinhu Street, Guangming New District, 518000 Shenzhen,

Guangdong, China

www.szfd-tech.com

Contact: Sophia Yang

Mobile/Wechat: 0086 17748655349

E-mail:sophia@szfd-tech.com

Skype:Sophia Yang (sophia@tcqh-sz.com)

Linkedin:

QQ: 90868103

Location：Home>>Heating part > PTC water heater >

PTC water heater

PTC transflux water heater-3

1) Transflux type. Water flows in the hole of the heating element and the water could be heated by the heating element.
2) Immerging type. The heating element is immerged in a water container, and the water could be heated by the heating element.
3) Underside type. The heating element can be put under a water container, and the water could be heated by the heating element.
4) Surrounding pipe type. The heating element can be surrounded out of the metal water pipe and the water in pipe could be heated.
The above types can be consist of materials below:
1) Aluminium shell or pipe, it is not good in resistance to corrosion. Anti-corrosion coating could be betterin resistance to corrosion.
2) Brass or copper shell or pipe, it is good in resistance to corrosion. But it costs higher.
3) Ceramic shell, it’s good in resistance to corrosion. But its heating power could not be very large.
4) Stainless steel shell or pipe, it’s very excellence for preventing corrosion, and meets food safe standard. But it costs higher and has bigger bulk.
5) Titanium shell, it’s very good in corrosion resistance, but the cost is quite high.

3. Some samples of uses.

PTC water heater could be used for shower, footbath, washing hand, vegetable and dish, drink warmer and boiler, fermenter, tea warmer, coffee wamer, milk warmer, vapor generator, sauna bath.

They could be used in heating diesel oil, gasoline or other liquid. Using PTC as a heating element could prevent the oil burning, it’s safer.

4. Notice in appliance.

PTC as a heating element, it fits for high safety, long life-time, slap-up product. In some situations, it’s low cost and convenient.

The electric power of PTC water heater changes with the temperature of water. The higher is the temperature of water, the smaller is the power.

Using higher switch temperature PTC can get higher power, 220~270Cswitch temperature PTC is selected usually. But if the switch temperature is too high, the reliable will reduce.

4. Current products.

Some immerging heating elements.
Shape	Width /mm	Thickness /mm	Length in water /mm	Screw or flange	Applied	Surface temperature without water /C	Power
					voltage / V		in 25C
							water /W
Aluminium tube	13.2	5.2	75	as required	220	250	100
Aluminium tube	21.5	6.8	75	as required	220	260	160
*Aluminium tube	21.5	12	100	as required	220	260	450
*Aluminium tube	21.5	24	200	as required	220	260	2000
round brass tube		Φ11.5	75	as required	220	240	100
Stainless steel tube		Φ25	200	as required	220	250	1100
Stainless steel tube		Φ35	200	as required	220V	250	1500

Notice:

1) Applied voltage could be 12~36V, 100~380V.

2) The length could be selected between some range, larger power could be made with longer tube.

3) The fixing connected screw or flange could consist of brass, aluminum or stainless steel. The shape could be selected by customer.

4) The surface temperature without water, could be between 50~260C, the higher is this temperature, the larger is the power.

5) For preventing corrosion, stainless steel shell, copper shell, titanium shell, monel shell, could be selectted. The surface can be nickel plating, paint anti-corrosion coating.